ScholarWorks@성균관대학교

초록

Although solar power is commonly considered a green energy source that can reduce carbon emissions, it emits a significant amount of carbon in its entirety, from the production of components and equipment to their use and disposal. In particular, frames that protect the edges of photovoltaic (PV) modules and provide mechanical strength to facilitate installation use aluminum as the primary material, which is produced by electrolyzing alumina derived from bauxite. This process produces a large amount of carbon dioxide: 11.3 kg per kilogram of aluminum. As research on large-area PV modules to achieve high power and efficiency progresses, the use of components such as cover glass and aluminum frames and the weight of PV modules increase; thus, it is difficult to construct and maintain mechanical properties that can withstand external forces such as wind and snow loads. Therefore, complex research is required, including the design of lightweight frames that can secure the mechanical properties of large-area PV modules while reducing the amount of aluminum used. In this study, we used the non-dominated sorting genetic algorithm-II (NSGA-II), a meta-heuristic optimization technique, and structural analysis simulation to design a lightweight frame model with mechanical strength similar to that of existing commercial frames while using less aluminum to reduce carbon emissions. We applied the proposed frame to a large-area PV module and compared its mechanical properties with those of a PV module with a commercial frame through mechanical load tests. Consequently, we present a frame model with mechanical properties similar to those of an existing PV module under mechanical loads in the range of 2400–7200 Pa while reducing the cross-sectional area by 10.13 %. © 2025 Elsevier B.V.

키워드