Optimization of Volute Tongue Geometry in a Double-Inlet Sirocco-Type Centrifugal Machine Using Multi-Objective Genetic Algorithm

  • Kim, Dong-Hyun; 
  • Kim, Younjea
Citations

SCOPUS

0

초록

This study presents a numerical investigation and optimal design of a double-inlet sirocco-type centrifugal machine, with particular emphasis on the role of the volute tongue geometry in overall performance. Sirocco-type centrifugal machines are widely employed in various fluid transport and energy conversion systems due to their capability to generate relatively high pressure rise; however, their efficiency is often constrained by flow non-uniformity, separation, and vortex formation near the impeller outlet and volute region, as reported in previous numerical and experimental studies [1,2]. These issues are further intensified in double-inlet configurations, where symmetric inflow streams interact within the volute, resulting in complex flow behavior around the volute tongue. To address these challenges, two key geometric parameters associated with the volute tongue were selected as the primary design variables: the volute tongue starting angle and the volute tongue-impeller clearance. These parameters directly influence pressure recovery, flow separation, and recirculation near the impeller discharge, and are therefore considered dominant factors governing the performance of the centrifugal machine, consistent with earlier investigations on volute cut-off optimization. By restricting the number of design variables to two, the physical interpretation of their effects and the robustness of the optimization process were enhanced. Three-dimensional steady-state computational fluid dynamics (CFD) simulations were conducted using ANSYS Fluent. The Reynolds-averaged Navier-Stokes equations were solved with the SST k-ω turbulence model, which is well suited for predicting flow separation under adverse pressure gradients. The baseline configuration of the centrifugal machine was first analyzed to establish reference performance characteristics. Subsequently, a design of experiments (DOE) approach was employed to generate representative design samples within the prescribed design space. Based on the CFD results, a multi-objective genetic algorithm (MOGA) was applied to perform optimal design of the volute tongue geometry. The optimization objectives were defined to simultaneously improve pressure rise and energy conversion efficiency while maintaining stable and uniform flow behavior in the volute region. In addition to overall performance metrics, the internal flow structures near the volute tongue were examined to elucidate the mechanisms responsible for performance variation and to support the optimization results. The results demonstrate that variations in the volute tongue starting angle and volute tongue-impeller clearance significantly alter the flow structure near the volute tongue, affecting the extent of flow separation and vortex generation. The optimized design exhibits simultaneous improvement in pressure rise and efficiency compared with the baseline configuration, accompanied by a more uniform flow distribution within the volute. © 2026, Avestia Publishing. All rights reserved.

제목
Optimization of Volute Tongue Geometry in a Double-Inlet Sirocco-Type Centrifugal Machine Using Multi-Objective Genetic Algorithm
저자
Kim, Dong-Hyun; Kim, Younjea
DOI
10.11159/enfht26.145
발행일
2026
유형
Conference paper
저널명
Proceedings of the World Congress on Momentum, Heat and Mass Transfer
페이지
1